Back to News Home

Pre-programmed controllers for service replacement:

ID Cool -ID Chill - ID Freeze

April 2006

A new range of electronic controllers, aimed at the service replacement market, is now exclusively available from Thermofrost Cryo and its stockists.

The range consists of three models, each pre-programmed to suit the most common refrigeration applications. The pre-programming allows them be used straight out of the box, with little or no programming required on site.

The ID Cool model is designed as a service replacement for cabinets and cold rooms cooling fruit, vegetables, beers, wines, flowers and general produce. Pre-set at +3 deg C, it can be adjusted within a temperature range of +3 to +15, and provides off-cycle defrost.

The ID Chill model suits cabinets and cold rooms storing chilled products, for example meat or poultry, and is pre-set at -2 deg C with an adjustment range from -15 to +5. It is pre-programmed for electric defrost, with fan delay, but is also suitable for hot gas defrost.

The third model, the ID Freeze, is pre-set at -18 deg C, with an adjustment range from -40 to -10, making it suitable for freezers and freezer cabinets storing frozen food, ice cream etc. Like the ID Chill, it is pre-programmed for electric defrost, with fan delay, with the option of hot gas defrost.

The dimensions of all three models conform to the industry standard 32 x 74 mm facia, and so they are suitable as a service replacement for all brands of controllers with that same format. It is estimated that over 75 models currently to be found in the UK market can be replaced by ID Cool, Chill and Freeze.

The ID Cool, Chill and Freeze operate on mains power supply, and are compatible with industry standard PTC and NTC sensors. Replacement sensors are included with each, for use if the existing probes are thought to be faulty.

The controllers are manufactured exclusively for Thermofrost Cryo by Italian controls manufacturer Eliwell.

Back to News Home