Pego ECP200 Expert 2EV control panel
The Pego ECP 200 EXPERT 2EV control panel increases the range 200 EXPERT with a controller for cold rooms with single-phase compressor up to 2 HP and two evaporators, specially designed to provide safety, protection, control and ease-of-installation - all in one unit. It allows a complete control of all the components on a refrigeration system with new features added.
Applications
• Complete control of single-phase static or ventilated refrigeration systems up to 2 HP, with off-cycle or electrical defrosting and direct or pump-down compressor stop.
• Control of two evaporators with two temperature probes of end defrost.
• Control of evaporating unit (single or double evaporator) only with freon solenoid consensus o remote motor condenser consensus.
ECP200 Expert 2EV features:
• Direct control of compressor, defrosting heaters, evaporator fans and room light with free-voltage outputs.
• Built-in differential magnetothermic breaker for protection and cut-off of refrigeration unit.
• Innovative, stylish design. Transparent cover for access to magnetothermic breaker, all with IP 65 protection rating.
• Auxiliary relay with parameter-configured activation (alarm, temperature set-point, direct control via frontal pushbutton, thermostat-holder demisting element, remote motor condenser unit consensus, freon solenoid control consensus where compressor pump-down operation is applied).
• Dedicated enabling of condensing unit in single evaporator configuration.
• RS485 for connection to TeleNET industrial supervision network.
• Guaranteed, certified safety and protection thanks to incorporated magnetothermic differential circuit breaker, which cuts the general power supply.
• Simple wiring.
• Easy installation and opening thanks to new hinged cover.
• Simple, flexible programming gives extreme versatility of use.
• Compressor can be run in pump-down stop mode.
• Installation times and costs reduced thanks to incorporation of control and protection in a single room-dedicated unit.
• Defrost with real time clock.
• Independent and separated functions for alarm relay, condensing unit enable and TeleNET monitoring system.
• HACCP function with memory of the last alarm and number of alarm counter.